Razorback MaxxDry XLGR 85L Dehumidifier 50HZ/230V/AU

Don't let the size fool you.. The Razorback MaxxDry XLGR 85L Dehumidifier removes up to 85 liters of water per day (40 liters @ AHAM (26C/60% RH)

Stackable and easy to transport, the space-saving design lets restorers pack more drying power into their trucks, saving extra trips and boosting profitability.

Built for the tough environments found in water damage restoration and construction with rugged rotomolded housing and durable construction. 

• Rotary compressor
• Effective and efficient
• Ducting options
• Condensate pump
• Easy handling
• Water full protection
• Environmental R410A refrigerant
• Automatic humidistat control
• Memory start
• Washable air filter
• Large diameter wheels
• Rotationally moulded body
• Cable / Hose wrap
• Low temperature 1~40 °C
• Quick connection to cable/hose
• Rare earth alloy tube evaporator
  

How Does XLGR Work? (Extra Low Grain Refrigerant)

XLGR microchannel technology uses a special air-to-air heat exchanger system to help bring the air closer to dew point temperature before it passes over the evaporator coils. This leads to more condensation forming on the coils and faster interchange of heat, which in turn leads to more moisture pumped out and lower humidity in the air that is returned to the room.

Razorback XLGR dehumidifiers can effectively remove moisture below 34 Grains Per Pound (LGR) using less energy than conventional refrigerant dehumidifiers. This extra efficiency makes Razorback XLGR dehumidifiers perfectly suited for challenging water damage restoration jobs where higher amounts of water are involved, and for achieving maximum results in low humidity conditions found towards the end of the drying process.

New Technology Rare-Earth Alloy

Razorback XLGR dehumidifiers are equipped with new technology rare-earth alloy tube evaporators that extend the life of the coils, providing protection in corrosive environments and maintain the coil's heat transferability.

• Total Hours (Life of the machine)
• Job Hours (From beginning to end of job inc defrost and standby)(does not reset if a client turns off the machine)
• In and Out Temp %Rh and GPP (Indicates the temperature, humidity, and moisture content of the air inlet and outlet)
• Humidistat Set Point %Rh (Indicates set humidity)
• Coil Temp (Display the current temperature of the coil)
• Time Until
  • Power Up (Compressor Ready)
  • Next Defrost
  • Defrost Completed
  • Next Purge
  • Purge Completed
  • Power Down (Time between shut down of compressor and fan)
• Fault Display

Specifications